Publications and Patents

Scientific publications of the IEW

PhD Theses

  1. 2024

    1. A. Echle, Oberwellengerechter Entwurf eines elektronisch kommutierten Axialflussmotors für den Einsatz in Elektrowerkzeugen, vol. 18. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 18. Düren: Shaker Verlag, 2024.

  2. 2023

    1. A. Enssle, Ganzheitliche Methodik zur Auslegung und Optimierung von transkutanen induktiven Energieübertragungssystemen, vol. 15. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 15. Düren: Shaker Verlag, 2023.
    2. D. Maier, Methodische Auslegung rotierender induktiver Energieübertragungssysteme für elektrische Traktionsantribe. Düren: Shaker Verlag, 2023.
    3. M. Waldhof, Scalable Design of Axial Flux Machines for Personalized Wearable Robotics, vol. 16. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 16. Düren: Shaker Verlag, 2023.
    4. S. Müller, Inductive Electrically Excited Synchronous Machines for Electrical Vehicles, 1. Auflage., vol. 14. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 14. Düren: Shaker, 2023.
    5. J. Terfurth, Integrated Multi-Motor Actuators for Medical and Industrial Robotics, vol. 13. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 13. Düren: Shaker Verlag, 2023.

  3. 2022

    1. J. Nägelkrämer, Aktive Geräuschreduktion hochausgenutzter permanentmagnetisch erregter Synchronmaschinen, vol. 12. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 12. Düren: Shaker Verlag, 2022.

  4. 2021

    1. M. Clappier, Simulation des elektromagnetischen Geräusches einer permanentmagnetisch erregten Synchronmaschine unter Berücksichtigung der Rotordynamik und mechanischer Fügestellen. Stuttgart, 2021.

  5. 2020

    1. M. Maier, Betrieb einer elektrisch erregten Synchronmaschine mittels kontaktloser, induktiver Energieübertragung auf den Rotor, 1. Auflage., vol. 11. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 11. Düren: Shaker, 2020.
    2. M. Böttigheimer, Methodischer Entwurf von Systemen zur Gefahrenreduktion von metallischen Fremdkörpern beim induktiven Laden von Elektrofahrzeugen, 1. Auflage., vol. 10. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 10. Düren: Shaker, 2020.
    3. Y. Xu, Online-Identifikation von akustikrelevanten Antriebsparametern zur Drehmomentwelligkeitsreduktion für PMSM-Antriebe, 1. Auflage., vol. Band 9. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. Band 9. Düren: Shaker, 2020.

  6. 2019

    1. M. Keller, Entwurf einer permanentmagnetisch erregten Transversalflussmaschine aus Pulververbundwerkstoff für Robotikanwendungen, 1. Auflage., vol. 8. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 8. Düren: Shaker, 2019.

  7. 2018

    1. A. Neubauer, Bürstenlose Gleichstrommaschine: Ein Beitrag zur Analyse, Berechnung und Optimierung, 1. Auflage., vol. 7. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 7. Herzogenrath: Shaker, 2018.

  8. 2017

    1. B. Jäger, Konzept zur Optimierung der Querdynamik von Elektrofahrzeugen mit Einzelradantrieb durch individuelle Verteilung der Antriebsmomente, 1. Auflage., vol. 5. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 5. Herzogenrath: Shaker, 2017.
    2. A. Ebrahimi, Hybrid Analytical Modeling and Optimization of Surface Mounted Permanent Magnetic Synchronous Motors Considering Spatial Harmonics, 1. Auflage., vol. 6. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 6. Herzogenrath: Shaker, 2017.

  9. 2015

    1. F. Dreher, “Entwurfs- und Optimierungsprozesse für Torque-Antriebe mit transversaler Flussführung,” Dissertation, Universität Stuttgart, 2015.
    2. P. Seibold, “Analytisches Verfahren zur Berechnung einer dreisträngigen geblechten Transversalflussmaschine für Traktionsantriebe,” Dissertation, Universität Stuttgart, 2015.

  10. 2014

    1. M. Gärtner, “Modellbildung einer Transversalflussmaschine für die stationäre und dynamische Simulation,” Dissertation, Universität Stuttgart, 2014.

  11. 2013

    1. D. Kampen, Optimierte Filterauslegung für dreiphasige Netzpulsstromrichter: Zugl.: Stuttgart, Univ., Diss., 2012, vol. 1. in Berichte aus dem Institut für Elektrische Energiewandlung, vol. 1. Aachen: Shaker, 2013.

Publications

  1. 2023

    1. W. Ye, T. Götz, B. Qi, and N. Parspour, “A Communication-Based Synchronization and Control Method for Bidirectional Wireless Power Transfer System,” in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. 2023, pp. 1--6. doi: 10.1109/IECON51785.2023.10311922.
    2. B. Kaiser, M. Schmid, and N. Parspour, “Comparison of Rotor Arrangements of Transverse Flux Machines for a Robotic Direct Drive optimized by Genetic Algorithm and Regression Tree Method,” in 2023 IEEE International Electric Machines & Drives Conference (IEMDC), in 2023 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2023, pp. 1--6. doi: 10.1109/IEMDC55163.2023.10238865.
    3. Andreas Schütz, Benedikt Kaiser, Adrian Schäfer, Nejila Parspour, Armin Lechler, and Alexander Verl, “Verspannt zu mehr Präzision: Genauigkeitssteigerung durch adaptive Verspannung in Robotikantrieben,” in Robotik und Produktion, in Robotik und Produktion. , 2023, pp. 26--27.
    4. A. Schäfer, U. Pecha, B. Kaiser, M. Schmid, and N. Parspour, “Accelerated 3D FEA of an Axial Flux Machine by Exclusively Using the Magnetic Scalar Potential,” Energies, vol. 16, no. 18, Art. no. 18, 2023, doi: 10.3390/en16186596.
    5. F. Dettinger et al., “Machine-Learning-Based Fault Detection in Electric Vehicle Powertrains Using a Digital Twin,” in 23rd Stuttgart International Symposium, in 23rd Stuttgart International Symposium. SAE International, 2023. doi: 10.4271/2023-01-1214.
    6. M. Prantner and N. Parspour, “Eddy Current Heating of Implanted Devices for Tumor Ablation: Numerical-Analytic Analysis and Optimization,” IEEE Access, p. 1, 2023, doi: 10.1109/ACCESS.2023.3280052.
    7. A. Baehr and N. Parspour, “Novel analytical calculation method of a wireless power transfer system for an inductive electrically excited synchronous machine,” in 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE), in 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE). IEEE, 2023, pp. 1--6. doi: 10.1109/WPTCE56855.2023.10216184.
    8. T. Petri, M. Keller, and N. Parspour, “The Influence of Voltage Form on the Insulation Resilience of Inverter-fed Low Voltage Traction Machines with Hairpin Windings,” in 2023 IEEE International Electric Machines & Drives Conference (IEMDC), in 2023 IEEE International Electric Machines & Drives Conference (IEMDC). 2023, pp. 1--6. doi: 10.1109/IEMDC55163.2023.10238888.
    9. M. Baranowski et al., “Additive-Subtractive Process Chain for Highly Functional Polymer Components,” International Journal of Mechanical Engineering and Robotics Research, pp. 339--346, 2023, doi: 10.18178/ijmerr.12.6.339-346.
    10. L. Elbracht, J. Noeren, and N. Parspour, “Design of a Scalable Multicoil Wireless Power Transfer System for Low Voltage Applications,” in 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE), in 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE). 2023, pp. 1--6. doi: 10.1109/WPTCE56855.2023.10216130.
    11. T. D. Götz and N. Parspour, “Decomposition of Impedance Loci in WPT Systems Under Mutual Interference of Magnetic Flux Conductivity Using Möbius Transform,” in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. 2023, pp. 1--8. doi: 10.1109/IECON51785.2023.10311749.
    12. J. Noeren, N. Parspour, and L. Elbracht, “An Easily Scalable Dynamic Wireless Power Transfer System for Electric Vehicles,” Energies, vol. 16, no. 9, Art. no. 9, 2023, doi: 10.3390/en16093936.
    13. S. Lu, M. Böttigheimer, and N. Parspour, “An Impedance Mapping-Based T-Compensation Network and Control Strategy for WPT System with Full-Bridge Active Rectifier,” IEEE Transactions on Power Electronics, pp. 1--14, 2023, doi: 10.1109/TPEL.2023.3294438.
    14. T. Velić, Y. Becher, and N. Parspour, “A Pareto Based Comparison of DC/DC Converters for Variable DC-Link Voltage in Electric Vehicles,” IEEE Open Journal of Power Electronics, pp. 1--14, 2023, doi: 10.1109/OJPEL.2023.3333255.
    15. A. Gneiting, S. Müller, and N. Parspour, “Sensorless Estimation of Rotor Current and Rotor Position for Inductive Electrically Excited Synchronous Machines,” in 2023 IEEE International Electric Machines & Drives Conference (IEMDC), in 2023 IEEE International Electric Machines & Drives Conference (IEMDC). 2023, pp. 1--6. doi: 10.1109/IEMDC55163.2023.10238998.
    16. S. Müller, D. Maier, and N. Parspour, “Inductive Electrically Excited Synchronous Machine for Electrical Vehicles---Design, Optimization and Measurement,” Energies, vol. 16, no. 4, Art. no. 4, 2023, doi: 10.3390/en16041657.

  2. 2022

    1. T. Kresse et al., “Additively Manufactured Transverse Flux Machine Components with Integrated Slits for Loss Reduction,” Metals, vol. 12, no. 11, Art. no. 11, 2022, doi: 10.3390/met12111875.
    2. Kurz Sascha, Stillig Javier, and Parspour Nejila, “Concept of a Scalable Communication System for Industrial Wireless Power Transfer Modules,” in 2022 4th Global Power, Energy and Communication Conference (GPECOM), in 2022 4th Global Power, Energy and Communication Conference (GPECOM). 2022, pp. 124--129. doi: 10.1109/GPECOM55404.2022.9815719.
    3. M. Springmann et al., “Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers,” Key Engineering Materials, vol. 926, pp. 268--279, 2022, doi: 10.4028/p-ed900k.
    4. Petri Timo, Keller Marina, and Parspour Nejila, “The Insulation Resilience of inverter-fed Low Voltage Traction Machines: Review, Challenges, Opportunities,” IEEE Access, p. 1, 2022, doi: 10.1109/ACCESS.2022.3210348.
    5. A. Gneiting, M. Waldhof, and N. Parspour, “A Systematic Design Methodology Based on Data Clustering for Automotive Drive Cycle Oriented Optimization of Electrically Excited Synchronous Machines,” in 2022 IEEE 7th Southern Power Electronics Conference (SPEC), in 2022 IEEE 7th Southern Power Electronics Conference (SPEC). 2022, pp. 1--8. doi: 10.1109/SPEC55080.2022.10058453.
    6. B. Kaiser, J. Terfurth, A. Schäfer, and N. Parspour, “Reduction of the Backlash Effect for a Five-Phase Spatially Distributed Transverse Flux Machine,” in 2022 IEEE 7th Southern Power Electronics Conference (SPEC), in 2022 IEEE 7th Southern Power Electronics Conference (SPEC). IEEE, 2022, pp. 1--6. doi: 10.1109/SPEC55080.2022.10058314.
    7. F. D. Lüdecke, M. Schmid, E. Rehe, S. Panneer Selvam, N. Parspour, and P. W. Cheng, “Numerical Aspects of a Two-Way Coupling for Electro-Mechanical Interactions---A Wind Energy Perspective,” Energies, vol. 15, no. 3, Art. no. 3, 2022, doi: 10.3390/en15031178.
    8. Elbracht Lukas, Noeren Jannis, and Parspour Nejila, “Investigation of a 48V Dynamic Inductive Energy Transfer System for Low Voltage Electric Vehicles,” in 2022 Wireless Power Week (WPW), in 2022 Wireless Power Week (WPW). 2022, pp. 492--496. doi: 10.1109/WPW54272.2022.9853975.
    9. Schmid Martin, Terfurth Jonathan, Kaiser Kim, and Parspour Nejila, “Electromagnetic Design of Electrical Machines - New Potentials of Additive Manufacturing with the Example of the Transverse Flux Machine,” in 2022 International Conference on Electrical Machines (ICEM), in 2022 International Conference on Electrical Machines (ICEM). 2022, pp. 1491--1497. doi: 10.1109/ICEM51905.2022.9910628.
    10. Pecha Urs, Wolter Kai, Wäschle Moritz, Parspour Nejila, and Bause Katharina, “Validation of Fault-Tolerant Control of Converters under Open-Switch Faults on Connected Test Benches,” in IECON 2022 -- 48th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2022 -- 48th Annual Conference of the IEEE Industrial Electronics Society. 2022, pp. 1--6. doi: 10.1109/IECON49645.2022.9968422.
    11. T. Goetz, A. Baehr, and N. Parspour, “Contribution to the Coupling Behavior Analysis of WPT Systems for Electric Vehicles with Flush Ground and Buried Primary Side Mounting,” in 2022 IEEE 7th Southern Power Electronics Conference (SPEC), in 2022 IEEE 7th Southern Power Electronics Conference (SPEC). 2022, pp. 1--6. doi: 10.1109/SPEC55080.2022.10058243.
    12. C. C. Brenner, A. Enssle, R. Schulz, and N. Parspour, “Navigation method utilizing floor-integrated inductive power supply modules for omnidirectional AGVs,” Forschung im Ingenieurwesen, 2022, doi: 10.1007/s10010-022-00605-y.
    13. Gong Yuancong et al., “Improvement of the Mechanical Strength of High Speed Synchronous Reluctance Machines by Fiber Reinforced Support Structures,” in 2022 International Conference on Electrical Machines 2022, in 2022 International Conference on Electrical Machines 2022. , 2022, pp. 49--55. doi: 10.1109/ICEM51905.2022.9910716.
    14. Götz Tobias, Noeren Jannis, Elbracht Lukas, and Parspour Nejila, “Analysis of the Eigenvalue Distortion in a Double-Sided LCC-Compensated Stationary Automotive WPT System during Coil Alignment,” in 2022 Wireless Power Week (WPW), in 2022 Wireless Power Week (WPW). 2022, pp. 503--508. doi: 10.1109/WPW54272.2022.9853950.
    15. Noeren Jannis, Elbracht Lukas, Parspour Nejila, Wörner Manuel, and Spindler Markus, “An Easily Scalable Dynamic WPT System for EVs,” in 2022 Wireless Power Week (WPW), in 2022 Wireless Power Week (WPW). 2022, pp. 482--486. doi: 10.1109/WPW54272.2022.9853998.
    16. Ye Weizhou, Wang Shouzheng, and Parspour Nejila, “A Foreign Object Detection Method using High Frequency Excitation for Wireless Power Transfer,” in 2022 Wireless Power Week (WPW), in 2022 Wireless Power Week (WPW). 2022, pp. 327--331. doi: 10.1109/WPW54272.2022.9853979.
    17. B. Kaiser and N. Parspour, “Transverse Flux Machine---A Review,” IEEE Access, vol. 10, pp. 18395--18419, 2022, doi: 10.1109/ACCESS.2022.3150905.
    18. Terfurth J., Waldhof M., Schmid M., Weber J., Keller M., and Parspour N., “Design and Evaluation of a Spatially Distributed and Gear-Integrated Transverse Flux Machine,” IEEE Transactions on Industrial Electronics, pp. 1--9, 2022, doi: 10.1109/TIE.2022.3189082.
    19. Velic Timijan, Barkow Maximilian, and Parspour Nejila, “Loss Model for SiC MOSFET based Power Modules using Synchronous Rectification,” in 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), in 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). 2022, pp. 503--510. doi: 10.1109/SPEEDAM53979.2022.9842103.
    20. Rabenstein L., Schmidt M., Dietz A., and Parspour N., “Design, Construction and Measurement of a Laminated Transverse Flux Machine,” in 2022 International Conference on Electrical Machines (ICEM), in 2022 International Conference on Electrical Machines (ICEM). 2022, pp. 1197--1203. doi: 10.1109/ICEM51905.2022.9910771.
    21. Keller Marina, Maier Marcel, Petri Timo, and Parspour Nejila, “Modelling the Dynamic Voltage Distribution in Electric Traction Motor Windings,” in 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), in 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). 2022, pp. 599--604. doi: 10.1109/SPEEDAM53979.2022.9842170.
    22. M. Schmid, J. Terfurth, K. Kaiser, and N. Parspour, “Electromagnetic Design of Electrical Machines - New Potentials of Additive Manufacturing with the Example of the Transverse Flux Machine,” in 2022 International Conference on Electrical Machines (ICEM), in 2022 International Conference on Electrical Machines (ICEM). Piscataway, NJ: IEEE, 2022, pp. 1491--1497. doi: 10.1109/ICEM51905.2022.9910628.
    23. M. Prantner and N. Parspour, “Heating Power of Millimeter-Sized Implanted Coils for Tumor Ablation: Numerical-Analytic Analysis and Optimization,” IEEE Access, vol. 10, pp. 67493--67509, 2022, doi: 10.1109/ACCESS.2022.3185751.
    24. M. Waldhof, I. Wochner, K. Stollenmaier, N. Parspour, and S. Schmitt, “Design and Scaling of Exoskeleton Power Units Considering Load Cycles of Humans,” Robotics, vol. 11, no. 5, Art. no. 5, 2022, doi: 10.3390/robotics11050107.
    25. Stillig Javier, Parspour Nejila, Ewert Daniel, and Jung Thomas Josef, “Feasibility Study on Machine Learning-based Method for Determining Self-and Mutual Inductance,” in 2022 International Seminar on Intelligent Technology and Its Applications (ISITIA), in 2022 International Seminar on Intelligent Technology and Its Applications (ISITIA). 2022, pp. 193--198. doi: 10.1109/ISITIA56226.2022.9855321.
    26. A. Baehr, T. Goetz, and N. Parspour, “Ground Assembly Coil Design Routine for Dynamic Wireless Power Transfer,” in 2022 IEEE 7th Southern Power Electronics Conference (SPEC), in 2022 IEEE 7th Southern Power Electronics Conference (SPEC). 2022, pp. 1--5. doi: 10.1109/SPEC55080.2022.10058267.

  3. 2021

    1. J. Stillig and N. Parspour, “Novel Infrastructure Platform for a Flexible and Convertible Manufacturing,” Advances in Science, Technology and Engineering Systems Journal, vol. 6, no. 1, Art. no. 1, 2021, doi: 10.25046/aj060141.
    2. Pecha Urs, Parspour Nejila, and Gieck Fabian, “Modeling and Analysis of Multiple Open-Switch Faults in Converters Supplying Permanent-Magnet Synchronous Machines,” in 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), in 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), vol. 1. 2021, pp. 240--246. doi: 10.1109/SDEMPED51010.2021.9605533.
    3. S. Lu, T. Lammle, and N. Parspour, “Analysis and Design of a T-Compensation Network with Switch-Controlled Capacitor for Wireless Power Transfer System,” in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2021, pp. 1--6. doi: 10.1109/WoW51332.2021.9462860.
    4. D. Maier, W. Ye, and N. Parspour, “Contactless Energy Transfer - Analytical Calculation of the Coil Systems’ Efficiencies for Different Topologies,” in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2021, pp. 1--5. doi: 10.1109/WoW51332.2021.9462893.
    5. M. Wäschle, K. Wolter, C. Han, U. Pecha, K. Bause, and M. Behrendt, “Validation concept for scenario-based connected test benches of a highly automated vehicle,” in Automatisiertes Fahren 2021, T. Bertram, Ed., in Automatisiertes Fahren 2021. Wiesbaden: Springer Fachmedien Wiesbaden, 2021, pp. 95--109.
    6. M. Prantner and N. Parspour, “Analytic multi Taylor approximation (MTA) for the magnetic field of a filamentary circular current loop,” Journal of Magnetism and Magnetic Materials, vol. 517, p. 167365, 2021, doi: 10.1016/j.jmmm.2020.167365.
    7. M. Wnuk et al., “Challenges in Robotic Soft Tissue Manipulation---Problem Identification Based on an Interdisciplinary Case Study of a Teleoperated Drawing Robot in Practice,” in Mechatronics and Machine Vision in Practice 4, in Mechatronics and Machine Vision in Practice 4. , Springer, Cham, 2021, pp. 245--262. doi: 10.1007/978-3-030-43703-920.
    8. J. Stillig, A. Enssle, and N. Parspour, “Modular Wireless Power Transfer System for the Supply of Mobile Industrial Production Equipment,” in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2021, pp. 1--6. doi: 10.1109/WoW51332.2021.9462864.
    9. D. Grundmann, A. Gneiting, J. M. Fischer, and N. Parspour, “Design and Optimization of a Quadruple 3-Phase Permanent Magnet Assisted Synchronous Reluctance Machine,” in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021, pp. 1--6. doi: 10.1109/IECON48115.2021.9589798.
    10. A. Lusiewicz, N. Parspour, and M. Chen, “Comparison of Lumped Primary Coil Systems With SAE J2954 Secondary Coils for Dynamic Wireless Charging,” in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2021, pp. 1--6. doi: 10.1109/WoW51332.2021.9462855.
    11. W. Ye, J. Noeren, L. Elbracht, and N. Parspour, “An Online Switching Frequency Modulation for Power Fluctuation Minimization of Non-Stationary Wireless Power Transfer,” in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021, pp. 1--6. doi: 10.1109/IECON48115.2021.9589783.
    12. D. Keller, A. Karayel, and N. Parspour, “Application of an accurate calculation method for dual three-phase PMSM,” in 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), in 2021 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD). IEEE, 2021, pp. 34--39. doi: 10.1109/WEMDCD51469.2021.9425677.
    13. A. Gneiting and N. Parspour, “Multi-Objective Optimization of a Quadruple 3-Phase Inductive Electrically Excited Synchronous Machine for 48V Traction Drives,” in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2021 -- 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2021, pp. 1--6. doi: 10.1109/IECON48115.2021.9589771.

  4. 2020

    1. L. Hausmann et al., “Review and Enhancements of Rotor Designs for High Speed Synchronous Reluctance Machines,” in 2020 10th International Electric Drives Production Conference (EDPC), in 2020 10th International Electric Drives Production Conference (EDPC). IEEE, 2020, pp. 1--8. doi: 10.1109/EDPC51184.2020.9388205.
    2. D. Keller, M. Kuenzler, A. Karayel, Q. Werner, and N. Parspour, “Potential of Dual Three-Phase PMSM in High Performance Automotive Powertrains,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9270907.
    3. A. Echle, U. Pecha, N. Parspour, and C. Gruner, “Design of a Novel High Power Density Single Sided Axial Flux Motor Using SMC Materials,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9270872.
    4. M. Owzareck, O. Akbas, S. Langfermann, and N. Parspour, “Metrological Loss Separation to Determine the Influence of Power Electronic Currents on the Static Hysteresis Losses of Passive Magnetic Components,” in PCIM Europe digital days 2020; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, in PCIM Europe digital days 2020; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. 2020, pp. 1--8.
    5. M. Hepp, D. Imamovic, W. Wondrak, and N. Parspour, “Predictive High Dynamic Current Control of Dual Three-Phase PMSMs,” IEEE, 2020. doi: 10.1109/ICEM49940.2020.9271022.
    6. D. Keller, A. Karayel, H. Naumoski, and N. Parspour, “Influence of Static Eccentricities on Performance and Control of Dual Three-Phase Permanent Magnet Synchronous Machines,” in 2020 10th International Electric Drives Production Conference (EDPC), in 2020 10th International Electric Drives Production Conference (EDPC). IEEE, 2020, pp. 1--8. doi: 10.1109/EDPC51184.2020.9388178.
    7. P. Präg, D. Maier, and N. Parspour, “Analysis of the Losses in Contactless Energy Transfer Systems Based on Different Distances Between Shielding, Ferrite and Coil,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 88--92. doi: 10.1109/WoW47795.2020.9291294.
    8. L. Rabenstein, A. Dietz, A. Kremser, and N. Parspour, “Semi-Analytical Calculation of a Laminated Transverse Flux Machine,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9271065.
    9. J. Fischer, M. Schmid, and N. Parspour, “Investigation of Maximum Torque per Ampere and Maximum Efficiency Control Strategies of a Transverse Flux Machine,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9270795.
    10. T. Lammle, N. Parspour, and J. Holz, “Comparison of Circular and Double-D Coil Topologies for Automotive Inductive Charging Systems,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 68--73. doi: 10.1109/WoW47795.2020.9291331.
    11. A. Enssle, N. Parspour, and F. Wu, “Coil System Optimization for Transcutaneous Energy Transfer Systems,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 141--145. doi: 10.1109/WoW47795.2020.9291273.
    12. S. Muller and N. Parspour, “Applying a Measurement-Based Iron Loss Model to an Efficiency Optimized Torque Control of an Electrically Excited Synchronous Machine,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9271029.
    13. M. Waldhof and N. Parspour, “Torque Ripple Minimization in Exoskeleton Drives with Multiphase Electrical Machines by Current Harmonic Injection,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020. doi: 10.1109/ICEM49940.2020.9270848.
    14. J. Noeren and N. Parspour, “Model Predictive Control for Contactless Energy Transfer Systems,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 6--9. doi: 10.1109/WoW47795.2020.9291327.
    15. P. Präg, D. Maier, and N. Parspour, “Analysis of the Losses in Contactless Energy Transfer Systems Based on Different Distances Between Shielding, Ferrite and Coil,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 88--92. doi: 10.1109/WoW47795.2020.9291294.
    16. A. Lusiewicz, N. Parspour, and S. Mader, “Magnetic Field Calculation for Three-Phase Wireless Power Transfer Systems,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 93--97. doi: 10.1109/WoW47795.2020.9291313.
    17. A. Echle, Y. Gong, J. Terfurth, and N. Parspour, “FEA-Based Comparison of BLDC and BLAC Modes for an Axial Flux Motor with Trapezoidal BEMF,” in IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2020, pp. 2694--2701. doi: 10.1109/IECON43393.2020.9255310.
    18. L. Elbracht, J. Noeren, and N. Parspour, “A Novel Combination of Resolver and Contactless Energy Transfer for Electric Excited Machines,” in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2020, pp. 294--297. doi: 10.1109/WoW47795.2020.9291308.
    19. J. Stillig and N. Parspour, “Classification of WPT Systems: Categorization, Differentiation and Overview of Industrial Wireless Power Transfer Systems,” in 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), in 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2020, pp. 1--6. doi: 10.1109/PEDES49360.2020.9379884.
    20. T. Lammle, N. Parspour, and M. Monch, “Analysis of the Magnetic Field Distribution in Inductive Power Transfer Systems under the Influence of Aluminum Shielding,” in 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech), in 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech). IEEE, 2020, pp. 1--6. doi: 10.23919/SpliTech49282.2020.9243851.
    21. L. Rabenstein, A. Dietz, and N. Parspour, “Design Concept of a Wound Field Transverse Flux Machine using Soft Magnetic Composite Claw-Poles,” in 2020 10th International Electric Drives Production Conference (EDPC), in 2020 10th International Electric Drives Production Conference (EDPC). IEEE, 2020, pp. 1--5. doi: 10.1109/EDPC51184.2020.9388176.
    22. J. Stillig, M. Edviken, and N. Parspour, “Overview and Aspects of Foreign Object Detection in Wireless Power Transfer Applications,” in 2020 IEEE Wireless Power Transfer Conference (WPTC), in 2020 IEEE Wireless Power Transfer Conference (WPTC). IEEE, 2020, pp. 380--383. doi: 10.1109/WPTC48563.2020.9295635.
    23. J. Stillig and N. Parspour, “Novel Concept for Wireless Power Transfer Modules,” in 2020 2nd International Conference on Broadband Communications, Wireless Sensors and Powering (BCWSP), in 2020 2nd International Conference on Broadband Communications, Wireless Sensors and Powering (BCWSP). IEEE, 2020, pp. 167--172. doi: 10.1109/BCWSP50066.2020.9249465.
    24. J. Terfurth, M. Schmid, and N. Parspour, “Planar Aligned Transverse Flux Machine with Integrated Reduction Gear,” in 2020 International Conference on Electrical Machines (ICEM), in 2020 International Conference on Electrical Machines (ICEM). IEEE, 2020, pp. 714--720. doi: 10.1109/ICEM49940.2020.9270742.
    25. A. Enssle and N. Parspour, “Power Loss Shifted Design of Inductive Energy Transfer Systems,” IEEE Open Journal of Power Electronics, vol. 1, pp. 113--123, 2020, doi: 10.1109/OJPEL.2020.2985982.

  5. 2019

    1. S. Yavuz, A. Echle, N. Parspour, and P. Mesmer, “Online Calculation Method of Hysteresis Limits of a Direct Torque Control for a Switched Reluctance Machine,” in IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2019, pp. 1242--1248. doi: 10.1109/IECON.2019.8926826.
    2. J. Terfurth and N. Parspour, “Concept of a Small Permanent Magnet Motor with External Spur Gear Rotor and High Torque Density,” in 2019 IEEE International Electric Machines & Drives Conference (IEMDC), in 2019 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2019, pp. 637--643. doi: 10.1109/IEMDC.2019.8785303.
    3. J. Heinrich, P. Präg, N. Parspour, and D. Maier, “Efficiency Factor Calculation for Contactless Energy Transfer Systems,” in 2019 IEEE Wireless Power Transfer Conference (WPTC), in 2019 IEEE Wireless Power Transfer Conference (WPTC). IEEE, 2019, pp. 130--135. doi: 10.1109/WPTC45513.2019.9055684.
    4. M. Owzareck, K. Lüning, and N. Parspour, “Optimization of a single strip tester to measure magnetic properties of electrical sheet steel at medium frequencies,” International Journal of Applied Electromagnetics and Mechanics, vol. 61, no. 6, Art. no. 6, 2019, doi: 10.3233/JAE-191285.
    5. D. Keller, A. Karayel, and N. Parspour, “Comparison of Two Different Winding Sets for Dual Three-Phase Permanent Magnet Machines,” in 2019 9th International Electric Drives Production Conference (EDPC), in 2019 9th International Electric Drives Production Conference (EDPC). IEEE, 2019, pp. 1--6. doi: 10.1109/EDPC48408.2019.9012029.
    6. M. Waldhof, A. Echle, and N. Parspour, “A Novel Drive Train Concept for Personalized Upper Body Exoskeletons with a Multiphase Axial Flux Machine,” in 2019 IEEE International Electric Machines & Drives Conference (IEMDC), in 2019 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2019, pp. 2160--2166. doi: 10.1109/IEMDC.2019.8785412.
    7. J. Heinrich, P. Präg, N. Parspour, and D. Maier, “Efficiency Factor Calculation for Contactless Energy Transfer Systems,” in 2019 IEEE Wireless Power Transfer Conference (WPTC), in 2019 IEEE Wireless Power Transfer Conference (WPTC). IEEE, 2019, pp. 130--135. doi: 10.1109/WPTC45513.2019.9055684.
    8. D. Maier, J. Heinrich, M. Zimmer, M. Maier, and N. Parspour, “Contribution to the System Design of Contactless Energy Transfer Systems,” IEEE Transactions on Industry Applications, vol. 55, no. 1, Art. no. 1, 2019, doi: 10.1109/TIA.2018.2866247.
    9. A. Echle, U. Pecha, G. Schmidt, and N. Parspour, “Influence of MMF Harmonics on the Iron Losses of Permanent Magnet Synchronous Machines,” in 2019 9th International Conference on Power and Energy Systems (ICPES), in 2019 9th International Conference on Power and Energy Systems (ICPES). IEEE, 2019, pp. 1--7. doi: 10.1109/ICPES47639.2019.9105570.
    10. A. Echle, S. Yavuz, and N. Parspour, “Two-Dimensional Flux Tubes for the Analytical Modeling of the Magnetic Field Problems,” in IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, in IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2019, pp. 1441--1447. doi: 10.1109/IECON.2019.8927262.
    11. J. Noeren and N. Parspour, “A Dynamic Model for Contactless Energy Transfer Systems,” in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2019, pp. 297--301. doi: 10.1109/WoW45936.2019.9030609.
    12. T. Lammle, N. Parspour, and C. Fuchs, “Investigation of the Influence of Split Ferrite Tiles in an Inductive Charging System with FEM -Simulation,” in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2019, pp. 65--70. doi: 10.1109/WoW45936.2019.9030606.
    13. D. Maier and N. Parspour, “Wireless Charging---A Multi Coil System for Different Ground Clearances,” IEEE Access, vol. 7, pp. 123061--123068, 2019, doi: 10.1109/ACCESS.2019.2938042.
    14. A. Enssle, L. Elbracht, N. Parspour, and N. Reiss, “Loss Shifted Design of Transcutaneous Energy Transfer Systems,” in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2019, pp. 29--33. doi: 10.1109/WoW45936.2019.9030617.
    15. D. Maier, J. Kurz, and N. Parspour, “Contactless Energy Transfer for Inductive Electrically Excited Synchronous Machines,” in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), in 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW). IEEE, 2019, pp. 191--195. doi: 10.1109/WoW45936.2019.9030682.
    16. Hackl Christoph M., Pecha Urs, and Schechner Korbinian, “Modeling and Control of Permanent-Magnet Synchronous Generators Under Open-Switch Converter Faults,” IEEE Transactions on Power Electronics, vol. 34, no. 3, Art. no. 3, 2019, doi: 10.1109/TPEL.2018.2855423.
    17. J. Terfurth and N. Parspour, “Integrated Planetary Gear Joint Actuator Concept for Wearable and Industrial Robotic Applications,” in 2019 Wearable Robotics Association Conference (WearRAcon), in 2019 Wearable Robotics Association Conference (WearRAcon). IEEE, 2019, pp. 28--33. doi: 10.1109/WEARRACON.2019.8719400.

  6. 2018-06-04

    1. J. Ziegler, “Integration einer elektrischen Antriebseinheit in ein E-Skateboard Prototypen,” Institut für Elektrische Energiewandlung, Stuttgart.

  7. 2018

    1. M. Maier and N. Parspour, “Operation of an Electrical Excited Synchronous Machine by Contactless Energy Transfer to the Rotor,” IEEE Transactions on Industry Applications, p. 1, 2018, doi: 10.1109/TIA.2018.2814558.
    2. S. Müller, M. Siegle, M. Keller, and N. Parspour, “Loss Calculation for Electrical Machines Based on Finite Element Analysis Considering 3D Magnetic Flux,” in 2018 XIII International Conference on Electrical Machines (ICEM), in 2018 XIII International Conference on Electrical Machines (ICEM). IEEE, 2018, pp. 1246--1252. doi: 10.1109/ICELMACH.2018.8506958.

For general questions about teaching at IEW

 

Institute of Electrical Energy Conversion

To the top of the page