Veröffentlichungen und Patente

Wissenschafliche Veröffentlichungen des IEWs

Dissertationen

  1. 2018

    1. A. Neubauer, Bürstenlose Gleichstrommaschine: Ein Beitrag zur Analyse, Berechnung und Optimierung, 1. Auflage., vol. 7. Herzogenrath: Shaker, 2018.
  2. 2017

    1. B. Jäger, Konzept zur Optimierung der Querdynamik von Elektrofahrzeugen mit Einzelradantrieb durch individuelle Verteilung der Antriebsmomente, 1. Auflage., vol. 5. Herzogenrath: Shaker, 2017.
    2. A. Ebrahimi, Hybrid Analytical Modeling and Optimization of Surface Mounted Permanent Magnetic Synchronous Motors Considering Spatial Harmonics, 1. Auflage., vol. 6. Herzogenrath: Shaker, 2017.
  3. 2015

    1. F. Dreher, “Entwurfs- und Optimierungsprozesse für Torque-Antriebe mit transversaler Flussführung,” PhD dissertation, Universität Stuttgart, 2015.
    2. P. Seibold, “Analytisches Verfahren zur Berechnung einer dreisträngigen geblechten Transversalflussmaschine für Traktionsantriebe,” PhD dissertation, Universität Stuttgart, 2015.
  4. 2014

    1. M. Gärtner, “Modellbildung einer Transversalflussmaschine für die stationäre und dynamische Simulation,” PhD dissertation, Universität Stuttgart, 2014.
  5. 2013

    1. D. Kampen, Optimierte Filterauslegung für dreiphasige Netzpulsstromrichter: Zugl.: Stuttgart, Univ., Diss., 2012, vol. 1. Aachen: Shaker, 2013.

Veröffentlichungen

  1. 2018

    1. M. Maier and N. Parspour, “Operation of an Electrical Excited Synchronous Machine by Contactless Energy Transfer to the Rotor,” IEEE Transactions on Industry Applications, p. 1, 2018.
  2. 2017

    1. S. Müller, M. Keller, M. Maier, and N. Parspour, “Comparison of iron loss calculation methods for soft magnetic composite,” in 2017 Brazilian Power Electronics Conference (COBEP), 2017, pp. 1--6.
    2. Nejila Parspour, Philipp Seitz, and Anna Lusiewicz, “Wireless power transfer for Railway Vehicles,” in Electric Vehicle Symposium 30, 2017.
    3. M. Maier, N. Parspour, P. Kleemann, and M. Hagl, “Construction and measurements of an electrical excited synchronous machine with inductive contactless energy transfer to the rotor,” in 2017 Brazilian Power Electronics Conference (COBEP), 2017, pp. 1--6.
    4. P. Seitz, N. Parspour, and M. Zimmer, “A scaled model for investigations of three-phase contactless energy transfer systems,” in 2017 IEEE Wireless Power Transfer Conference (WPTC), 2017, pp. 1--4.
    5. N. Parspour, D. Maier, and M. Böttigheimer, “Contactless Energy Transfer for Charging Electric and Hybrid Electric Vehicles,” in Electric Vehicle Symposium 30, 2017.
    6. M. Keller and N. Parspour, “Experimental identification and validation of model parameters of a permanent magnetic excited transverse flux machine for robotic applications,” in 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Piscataway, NJ, 2017, pp. 352--357.
    7. M. Böttigheimer, N. Parspour, and M. Armbruster, “Optimization of the Coupling Factor Curve for Lateral Offset of a Coil Pair for Contactless Inductive Charging to Generate Positioning Tolerance,” 2017.
    8. P. Präg and N. Parspour, “Dynamic Charging of Electric Vehicles - Demonstrator for Contactless Energy Transfer,” in 2017 Brazilian Power Electronics Conference (COBEP), 2017, pp. 1--5.
  3. 2016

    1. M. Maier, D. Maier, M. Zimmer, and N. Parspour, “A novel self oscillating power electronics for contactless energy transfer and frequency shift keying modulation,” in 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Piscataway, NJ, 2016, pp. 67--72.
    2. M. Keller, S. Müller, and N. Parspour, “Design of a transverse flux machine as joint drive for an articulated six-axis robot arm,” in 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Piscataway, NJ, 2016, pp. 849--854.
    3. M. Maier and N. Parspour, “Operation of an electrical excited synchronous machine by contactless energy transfer to the rotor,” in 2016 IEEE International Power Electronics and Motion Control Conference (PEMC), 2016, pp. 625--630.
    4. M. Maier, M. Hagl, M. Zimmer, J. Heinrich, and N. Parspour, “Design and construction of a novel rotating contactless energy transfer system for an electrical excited synchronous machine,” in 2016 XXII International Conference on Electrical Machines (ICEM), 2016, pp. 709--714.
    5. F. Schuller, M. Maier, P. Seibold, and N. Parspour, “Modeling and parameter estimation of a three phase permanent magnet excited transverse flux machine,” in 2016 XXII International Conference on Electrical Machines (ICEM), 2016, pp. 439--444.
    6. M. Maier, M. Zimmer, J. Heinrich, D. Maier, and N. Parspour, “Dimensioning of a contactless energy transfer system for an electrical excited synchronous machine,” in 2016 IEEE Wireless Power Transfer Conference (WPTC), Piscataway, NJ, 2016, pp. 1--3.
    7. M. Owzareck and N. Parspour, “Simulation of a 3-phase common- and differential mode inductor on a four-limb core,” in PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Berlin, 2016.
    8. M. Keller, S. Müller, and N. Parspour, “Design of a permanent magnetic excited transverse flux machine for robotic applications,” in 2016 XXII International Conference on Electrical Machines (ICEM), 2016, pp. 1520--1525.
    9. M. Böttigheimer, N. Parspour, M. Zimmer, and A. Lusiewicz, “Design of a Contactless Energy Transfer System for an Electric Vehicle,” in PCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Berlin, 2016.
    10. S. Yavuz, A. Echle, and N. Parspour, “Control strategy for a direct torque control of a Switched Reluctance Motor,” in 2016 XXII International Conference on Electrical Machines (ICEM), 2016, pp. 1008--1014.
    11. S. Müller et al., “3D-FEM Simulation of a Transverse Flux Machine Respecting Nonlinear and Anisotropic Materials,” in Comsol Conference 2016, COMSOL, Ed. 2016, pp. 1--6.
    12. M. Holzer et al., “On the Shielding Properties of Carbon Fiber Reinforced Plastic Composites in Magnetic Near Fields with Low Kilohertz Frequency,” in Sampe2016, 2016.
    13. D. Maier, J. Heinrich, M. Zimmer, M. Maier, and N. Parspour, “Contribution to the system design of contactless energy transfer systems,” in 2016 IEEE International Power Electronics and Motion Control Conference (PEMC), 2016, pp. 1008--1013.
  4. 2015

    1. B. Jäger, P. Neugebauer, R. Kriesten, N. Parspour, and C. Gutenkunst, “Torque-vectoring stability control of a four wheel drive electric vehicle,” in 2015 IEEE Intelligent Vehicles Symposium (IV), Piscataway, NJ, 2015, pp. 1018--1023.
    2. S. Yavuz, N. Parspour, and A. Ebrahimi, “Design of a Switched Reluctance Machine as a Near-Wheel Motor for Electric Vehicles,” in PCIM Europe 2015, Nürnberg, 2015.
  5. 2014

    1. P. Seibold, F. Schuller, M. Beez, and N. Parspour, “Design and measurement of a laminated permanent magnet excited transverse flux machine for electrical vehicles,” in 4th International Electric Drives Production Conference (EDPC 2014), Piscataway, NJ, 2014, pp. 1--6.
    2. Y. Xu, N. Parspour, and U. Vollmer, “Torque Ripple Minimization Using Online Estimation of the Stator Resistances With Consideration of Magnetic Saturation,” IEEE Transactions on Industrial Electronics, vol. 61, no. 9, pp. 5105--5114, 2014.
    3. B. Jäger, P. Neugebauer, and N. Parspour, “Hardware-in-the-Loop Fahrdynamikprüfstand für 4WD-Elektrofahrzeuge,” in 17. Kongress SIMVEC - Simulation und Erprobung in der Fahrzeugentwicklung 2014 : Berechnung, Prüfstands- und Straßenversuch ; Baden-Baden, 18. und 19. November 2014, Düsseldorf, 2014.
    4. M. Zimmer, J. Heinrich, and N. Parspour, “Design of a 3 kW primary power supply unit for inductive charging systems optimized for the compatibility to receiving units with 20 kw rated power,” in 4th International Electric Drives Production Conference (EDPC 2014), Piscataway, NJ, 2014, pp. 1--5.
    5. P. Seibold and N. Parspour, “Analytical computation method of transverse flux permanent magnet excited machines via nodal analysis,” in International Conference on Electrical Machines (ICEM), 2014, Piscataway, NJ, 2014, pp. 410--415.
    6. F. Schuller, N. Parspour, and L. Chen, “Position control of a linear transverse flux machine with subordinate current control,” in International Conference on Electrical Machines (ICEM), 2014, Piscataway, NJ, 2014, pp. 629--633.
  6. 2013

    1. A. Ebrahimi and N. Parspour, “Modified analytical modeling of surface mounted permanent magnet synchronous motor --- Design and prototype tests,” in Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 2013, Piscataway, NJ, 2013, pp. 346--351.
    2. B. Jäger, P. Neugebauer, and N. Parspour, “Torque-Vectoring -- Optimierung des fahrdynamischen Verhaltens von Elektrofahrzeugen mit Einzelradaktorik,” in Tagungsband / Antriebstechnisches Kolloquium ATK 2013, Aachen, 2013.
    3. A. Ebrahimi, N. Parspour, and M. Fabian, “Design and qualitative thermographic comparison of different power inverter packaging,” in Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG), 2013, Piscataway, NJ, 2013, pp. 401--404.
    4. A. Ebrahimi, M. Maier, and N. Parspour, “Analysis of torque behavior of permanent magnet synchronous motor in field-weakening operation,” in IEEE Power and Energy Conference at Illinois (PECI), 2013, Piscataway, NJ, 2013, pp. 120--124.
  7. 2012

    1. M. Gärtner, F. Schuller, N. Parspour, and P. Seibold, “Analytical modeling and simulation of highly utilized electrical machines considering nonlinear effects,” in XXth International Conference on Electrical Machines (ICEM), 2012, Piscataway, NJ, 2012, pp. 2786--2791.
    2. F. Dreher and N. Parspour, “Reducing the cogging torque of PM Transverse Flux Machines by discrete skewing of a segmented stator,” in XXth International Conference on Electrical Machines (ICEM), 2012, Piscataway, NJ, 2012, pp. 454--457.
    3. Y. Xu, N. Parspour, and U. Vollmer, “Torque ripple minimization for PMSM using online estimation of the stator resistances,” in XXth International Conference on Electrical Machines (ICEM), 2012, Piscataway, NJ, 2012, pp. 1107--1113.
    4. F. Dreher, A. Ebrahimi, and N. Parspour, “Optimizing the control behavior of Transverse Flux Machines by the use of hybrid flux conduction,” in International Conference and Exposition on Electrical and Power Engineering (EPE), 2012, Piscataway, NJ, 2012, pp. 374--378.
    5. P. Seibold, M. Gärtner, F. Schuller, and N. Parspour, “Design of a transverse flux permanent magnet excited machine as a near-wheel motor for the use in electric vehicles,” in XXth International Conference on Electrical Machines (ICEM), 2012, Piscataway, NJ, 2012, pp. 2641--2646.
    6. D. Kampen, M. Owzareck, S. Beyer, N. Parspour, and S. Schmitt, “Analytical core loss models for electrical steel in power electronic applications,” in 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2012, Piscataway, NJ, 2012, pp. 109--117.
    7. F. Dreher and N. Parspour, “A novel high-speed permanent magnet claw pole Transverse Flux Machine for use in automation,” in 2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2012), Piscataway, NJ, 2012, pp. 1240--1245.
    8. Y. Xu, U. Vollmer, A. Ebrahimi, and N. Parspour, “Online estimation of the stator resistances of a PMSM with consideration of magnetic saturation,” in International Conference and Exposition on Electrical and Power Engineering (EPE), 2012, Piscataway, NJ, 2012, pp. 360--365.
  8. 2011

    1. M. Gärtner, P. Seibold, and N. Parspour, “Laminated circumferential transverse flux machines - lamination concept and applicability to electrical vehicles,” in IEEE International Electric Machines & Drives Conference (IEMDC), 2011, Piscataway, NJ, 2011, pp. 831--837.
  9. 2010

    1. J. Heinrich and N. Parspour, “Contribution to the development of positioning tolerant inductive charging systems,” in Emobility - electrical power train, 2010, Piscataway, NJ, 2010, pp. 1--5.
    2. M. Gärtner, N. Parspour, and T. Burgstaller, “Hardware emulation of transverse flux machines based on an analytical model considering saturation effects,” in XIX International Conference on Electrical Machines (ICEM), 2010, Piscataway, NJ, 2010, pp. 1--6.
    3. M. Gärtner, N. Parspour, P. Seibold, R. Bohl, and M. Klein, “Position control of a permanent magnet transverse flux machine with very high force density for industrial automation systems,” in 14th International Power Electronics and Motion Control Conference (EPE/PEMC), 2010, Piscataway, NJ, 2010.
  10. 2008

    1. D. Kampen, N. Parspour, U. Probst, and U. Thiel, “Comparative evaluation of passive harmonic mitigating techniques for six pulse rectifiers,” in 11th International Conference on Optimization of Electrical and Electronic Equipment, 2008, Piscataway, NJ, 2008, pp. 219--225.
  11. 2005

    1. N. Parspour, “Novel Drive for Use in Electrical Vehicles,” in Proceedings / 2005 IEEE 61st Vehicular Technology Conference, VTC 2005-Spring, Piscataway, NJ, 2005, pp. 2930--2933.
  12. 2004

    1. H. R. Karimi, A. Babazadeh, and N. Parspour, “Robust output tracking of transverse flux machines using RBF neural network,” in IEEE Conference on Robotics, Automation and Mechatronics, 2004, Piscataway, NJ, 2004, pp. 496--501.
    2. A. Babazadeh, N. Parspour, and A. Hanifi, “Transverse flux machine for direct drive robots: modelling and analysis,” in IEEE Conference on Robotics, Automation and Mechatronics, 2004, Piscataway, NJ, 2004, pp. 376--380.
  13. 1994

    1. N. Parspour and R. Hanitsch, “Fuzzy controlled brushless DC motor for medical applications,” in IECON ’94, Piscataway, NJ, 1994, pp. 1310--1314.

Bei Fragen...

 

Institut für Elektrische Energiewandlung