Dieses Bild zeigt Nejila Parspour

Nejila Parspour

Frau Prof. Dr.-Ing.

Direktorin
Institut für Elektrische Energiewandlung

Kontakt

+49 711 685 67819
 +49 711 685 57837

Pfaffenwaldring 47
70569 Stuttgart
Deutschland
Raum: 0.345

  1. 2026

    1. Lefringhausen, Tim Jonathan, Simon Knecht, Nejila Parspour und Albert Albers. 2026. Multidisciplinary design optimization of a transverse flux machine based on a multi-step loss calculation method. Discover Applied Sciences 8: 297. doi:10.1007/s42452-026-08385-8, .

  2. 2025

    1. Goebels, Max, Alexander Schulte, Patrick Georgi, Fabian Heimberger, Jannik Schwalm, Oliver Liewerenz, Adrian Schäfer, u. a. 2025. Software-Defined Value Stream Process Systems. Machines 13. doi:10.3390/machines13010042, https://www.mdpi.com/2075-1702/13/1/42.
    2. Schmidt, Leonard, Daniel Fritz, Lukas Elbracht und Nejila Parspour. 2025. Transient Loss Measurement and Simulation in Ferrite Tiles for WPT-Systems. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062280, .
    3. Faber, Fides Lucia und Nejila Parspour. 2025. Multi-Objective Optimization and Thermal Modeling of Coil Systems for Transcutaneous Inductive Energy Transfer. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062180, .
    4. Burkard, Felix, Andreas Bähr, Andreas Gneiting und Nejila Parspour. 2025. Dynamic Modeling of Series-Parallel Compensated Wireless Power Transfer Systems for iEESM Applications Using an LPV Approach. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–5. doi:10.1109/WPTCE62521.2025.11062196, .
    5. Götz, Tobias D., Daniel Fritz, Weizhou Ye, Rinor Krasniqi und Nejila Parspour. 2025. Contribution to the Sizing of Circular Coil Assemblies for Interoperable 22 kW Inductive Charging of Light-Duty EVs. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062160, .
    6. Sauerzapf, Robin, Moritz Gewehr, Weizhou Ye, Andreas Schneider, Sabine Klinkner und Nejila Parspour. 2025. Simultaneous Wireless Data and Power Transfer Testing onboard the Nanokhod Microrover Tether Mechanism for Lunar Surface Exploration. In: IECON 2025 -- 51st Annual Conference of the IEEE Industrial Electronics Society, 1–6. doi:10.1109/IECON58223.2025.11221690, .
    7. Lu, Siyuan und Nejila Parspour. 2025. Modeling and Design of a Frequency Controller for Full-Bridge Active Rectifier Applied to Wireless Power Transfer System. IEEE Access 13: 146252–146266. doi:10.1109/ACCESS.2025.3600437, .
    8. Schmidt, Michael, Johannes Germishuizen, Armin Dietz und Nejila Parspour. 2025. Optimisation Method for an Asymmetric Rotor Design to Reduce Torque Ripple in Reluctance Synchronous Machines. In: IKMT 2025; 14. GMM/ETG-Fachtagung, 24–29.
    9. Gneiting, Andreas, Andreas Bähr, Felix Burkard und Nejila Parspour. 2025. Automotive Drive Cycle Loss Analysis of a Wireless Power Transfer System for Electric Vehicle Traction Machine Rotor Excitation. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062305, .
    10. Elbracht, Lukas, Tobias Götz und Nejila Parspour. 2025. Design Considerations for LCC - LCC Wireless Power Transfer Systems Utilizing Passive Rectifiers. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062204, .
    11. Elbracht, Lukas, Feiyang J. Lin, Daniel Fritz, Nejila Parspour, Grant A. Covic und Patrick A. J. Lawton. 2025. An Interoperability Study of a 10/50 kW Bipolar Vehicle Pad. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062168, .
    12. Götz, Tobias D., Weizhou Ye, Lukas Elbracht, Christian Grüner und Nejila Parspour. 2025. Antrieb, Wechselspeichersystem und induktives Laden. In: FlexCAR: Eine Forschungsplattform für das autonome Fahren, hg. von Ansgar Gerlicher und Michael Lahres, 9–19. Berlin, Heidelberg: Springer Berlin Heidelberg. doi:10.1007/978-3-662-69750-4_2, .
    13. Fritz, Daniel, Lukas Elbracht und Nejila Parspour. 2025. Design Considerations and Effects of Different Quality Factors of the Secondary Pad on Efficiency in Wireless Power Transfer Systems. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE62521.2025.11062257, .
    14. Gneiting, Andreas, Felix Burkard und Nejila Parspour. 2025. Performance Evaluation of Aluminum and Copper Windings in Electrically Excited Synchronous Machines Considering Drive Cycle Efficiency and Maximum Continuous Power. In: 2025 IEEE International Electric Machines & Drives Conference (IEMDC), 1117–1122. doi:10.1109/IEMDC60492.2025.11060993, .
    15. Yuancong Gong, Andreas Gneiting, Steffen Weigel, Nejila Parspour und Zhouxing An. 2025. Surrogate Model Based Drive Cycle Modelling and Optimization of Synchronous Reluctance Machines for Electric Vehicles. IEEE Transactions on Magnetics. doi:10.1109/TMAG.2025.3544386, .
    16. Schäfer, Adrian, Yuancong Gong und Nejila Parspour. 2025. Fast Identification of the Jiles-Atherton-Model Parameters and the Electric Conductivity Based on Gaussian Process Regression. IEEE Transactions on Magnetics: 1. doi:10.1109/TMAG.2025.3541244, .
    17. Burkard, Felix, Andreas Gneiting und Nejila Parspour. 2025. PWM Loss Analysis in Electrically Excited Synchronous Machines: Implications for Loss-Optimal Operation. In: 2025 IEEE International Electric Machines & Drives Conference (IEMDC), 697–702. doi:10.1109/IEMDC60492.2025.11061020, .
    18. Kaiser, Benedikt, Adrian Schäfer, Andreas Gneiting und Nejila Parspour. 2025. Understanding Power Factor Limitations in Transverse Flux Machines: A Frozen Permeability Analysis of Magnetic Flux Linkage. In: 2025 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 1–6. doi:10.1109/WEMDCD61816.2025.11014113, .
    19. Gong, Yuancong, Andreas Gneiting, Chongshen Zhao, Nejila Parspour und Hao Chen. 2025. Comparative Study of Different Data-Driven Surrogate Models for Optimization of Synchronous Reluctance Machine. IEEE Transactions on Industry Applications: 1–13. doi:10.1109/TIA.2025.3587180, .
    20. Götz, Tobias D., Daniel Fritz, Weizhou Ye, Rinor Krasniqi und Nejila Parspour. 2025. Experimental Comparison of Circular Test Station Devices for Interoperable 22 kW Inductive Charging of Light-Duty EVs. doi:10.36227/techrxiv.176341369.91157821/v1, .
    21. Weigel, Steffen, Adrian Schäfer und Nejila Parspour. 2025. Investigation on the Steel Sheet Subdivision and Orientation Potentials of an Axial Flux Machine. In: 2025 Joint MMM-Intermag Conference (INTERMAG), 1–5. doi:10.1109/INTERMAG49787.2025.11087789, .
    22. Schäfer, Adrian, Steffen Weigel und Nejila Parspour. 2025. Efficient and Versatile Anhysteretic Magnetization Models for Soft Magnetic Materials in FEA and Circuit Simulations. IEEE Transactions on Magnetics: 1. doi:10.1109/TMAG.2025.3539352, .
    23. Ye, Weizhou, Pratyush Shukla und Nejila Parspour. 2025. Ultra-Wideband Based Synchronization Method for Bidirectional Wireless Power Transfer Systems. In: 2025 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–5. doi:10.1109/WPTCE62521.2025.11062237, .
    24. Ye, Weizhou, Jannis Noeren und Nejila Parspour. 2025. An Algorithm for Online Coupling Factor Estimation of Wireless Power Transfer System. In: The Proceedings of the 19th Annual Conference of China Electrotechnical Society, hg. von Qingxin Yang, Chunbo Zhu, Chenyang Xia, Yang Li, Zhichao Luo, und Cancan Rong, 581–591. Singapore: Springer Nature Singapore.
    25. Clauer, Maximilian, David Bauer und Nejila Parspour. 2025. High-speed oil-cooled PMSM with novel permanent magnet shape and carbon fiber sleeved rotor for high-performance powertrain. e+i Elektrotechnik und Informationstechnik. doi:10.1007/s00502-025-01310-8, .
    26. Baehr, Andreas, Felix Burkard, Andreas Gneiting und Nejila Parspour. 2025. Novel Efficient Compensation Design of a 1S2P Wireless Power Transfer System for an Inductive Electrically Excited Synchronous Machine. In: 2025 Energy Conversion Congress & Expo Europe (ECCE Europe), 1–6. doi:10.1109/ECCE-Europe62795.2025.11239010, .
    27. Knecht, Simon, Albert Albers, Andreas Baehr, Nejila Parspour, Holger Ahlborn und Peter Middendorf. 2025. Topology Optimization for the Design of a Heat Sink in an Inductive Electrically Excited Synchronous Machine. In: Proceedings of the ASMO UK13-EU2 / ISSMO conference. Ed.: I. Lepot, 96–103. University of Leeds.
    28. Pecha, Urs und Nejila Parspour. 2025. Analysis and Fault-Tolerant Control of Permanent-Magnet Synchronous Machines under Multiple Open-Switch Converter Faults. In: IECON 2025 -- 51st Annual Conference of the IEEE Industrial Electronics Society, 1–6. doi:10.1109/IECON58223.2025.11221091, .
    29. Regnet, Martin, Michael Schmidt, Alejandro Valencia Pérez, Bernd Löhlein, Michael Reinlein, Armin Dietz, Johannes Germishuizen und Nejila Parspour. 2025. Magnetic Measurements of a Stator Core Under Manufacturing Influences and the Impacts on the Design Process of a Reluctance Synchronous Machine. Machines 13. doi:10.3390/machines13090761, https://www.mdpi.com/2075-1702/13/9/761.

  3. 2024

    1. Gneiting, Andreas, Felix Burkard, David Maier, Jannis Noeren und Nejila Parspour. 2024. Wireless Power Transfer Model Based Estimation of Rotor Current and Temperature for Inductive Electrically Excited Synchronous Machines. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 404–408. IEEE. doi:10.1109/WPTCE59894.2024.10557259, .
    2. Götz, Tobias D. und Nejila Parspour. 2024. Coupling-Based Multi-Objective Optimization of a Flush Ground Primary Coil for WPT3 SAE J2954 Vehicle Assemblies. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 723–728. doi:10.1109/WPTCE59894.2024.10557359, .
    3. Clauer, Maximilian, David Bauer und Nejila Parspour. 2024. Novel Stator Topology with Adjustable Stator Tooth Tips to Reduce Partial Losses at High Speeds in a PMSM. In: 2024 International Conference on Electrical Machines (ICEM), 1–7. doi:10.1109/ICEM60801.2024.10700142, .
    4. Kaiser, Benedikt, Adrian Schäfer, Andreas Schütz, Nejila Parspour, Armin Lechler und Alexander Verl. 2024. Identification of a Lumped-Parameter-Model for a Dual-Motor Robotic Drive Train with Backlash and Electrical Preload. In: 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 1184–1190. doi:10.1109/SPEEDAM61530.2024.10609128, .
    5. Noeren, Jannis, Tobias D. Götz, Lukas Elbracht und Nejila Parspour. 2024. Quality Factor Comparison of Pipe Coils in Wireless Charging Applications. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 816–820. doi:10.1109/WPTCE59894.2024.10557435, .
    6. Keller, Marina, Timo Petri, Marcel Waldhof, Frieder Schuller, Marcel Maier und Nejila Parspour. 2024. Modeling the Dynamic Voltage Distribution in Electric Traction Motor Windings and its Application on HV Optimal Winding Design. IEEE Transactions on Industry Applications: 1–10. doi:10.1109/TIA.2024.3357053, .
    7. Baehr, Andreas, Holger Ahlborn, Simon Knecht und Nejila Parspour. 2024. Highly Integrated Wireless Power Transfer System for an Inductive Electrically Excited Synchronous Machine. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 64–68. IEEE. doi:10.1109/WPTCE59894.2024.10557297, .
    8. Ye, Weizhou, Boya Qi und Nejila Parspour. 2024. Design and Analysis of a New Configuration for LCC-LCC-Compensated WPT System Using Bilateral Absolute Phase Shift Control. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 783–787. doi:10.1109/WPTCE59894.2024.10557304, .
    9. Ye, Weizhou und Nejila Parspour. 2024. A Bidirectional Wireless Power Transfer System with Integrated Near-Field Communication for E-Vehicles. Vehicles 6: 256–274. doi:10.3390/vehicles6010011, https://www.mdpi.com/2624-8921/6/1/11.
    10. Ye, Weizhou, Jin Xu und Nejila Parspour. 2024. A Hybrid Detector Array for Simultaneous Detection of Living and Metal Object in Wireless Power Transfer Systems. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 618–621. doi:10.1109/WPTCE59894.2024.10557258, .
    11. Kampker, Achim, Henrik Born, Sebastian Hartmann, David Drexler, Jörg Franke, Marcel Baader, Roman Hahn, Nejila Parspour, Adrian Schäfer und Urs Pecha. 2024. Comprehensive Review and Systemization of the Product Features of Axial Flux Machines. In: 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS), 1–11. doi:10.1109/EPTS61482.2024.10586731, .
    12. Elbracht, Lukas, Feiyang J. Lin, Nejila Parspour, Grant A. Covic und Patrick A. J. Lawton. 2024. Input Voltage Range Optimization of a High Power Wireless Power Transfer System for Constant Power Output. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 582–587. doi:10.1109/WPTCE59894.2024.10557382, .
    13. Keller, Daniel, Akif Karayel, Robin Krueger, Hristian Naumoski, Uwe Schaefer und Nejila Parspour. 2024. Effect of Rotor Step Skew on the Demagnetization Ratio of Permanent Magnet Synchronous Machines. In: 2024 International Conference on Electrical Machines (ICEM), 1–6. doi:10.1109/ICEM60801.2024.10700102, .
    14. Fritz, Daniel, Lukas Elbracht, Jannis Noeren, Marco Zimmer und Nejila Parspour. 2024. Design and Implementation of a 200 kW Inductive Wireless Power Transfer System using a Modular Approach. In: 2024 IEEE 9th Southern Power Electronics Conference (SPEC), 1–6. doi:10.1109/SPEC62217.2024.10893281, .
    15. Kaiser, Benedikt, Andreas Gneiting, Martin Schmid und Nejila Parspour. 2024. Analysis of AC Winding Resistance considering different Conductor Materials in Transverse Flux Permanent Magnet Synchronous Machines: accepted, to be published. In: ICEM. Torino, Italy.
    16. Schäfer, Adrian, Urs Pecha, Nejila Parspour, Achim Kampker, Henrik Born, Sebastian Hartmann, Jörg Franke, Marcel Baader und Roman Hahn. 2024. A Review of Electromagnetic Simulation and Modelling Approaches for the Research on Axial Flux Synchronous Machines. In: 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS).
    17. Baader, Marcel, Roman Hahn, Jörg Franke, Achim Kampker, Henrik Born, Sebastian Hartmann, David Drexler, Nejila Parspour, Adrian Schäfer und Urs Pecha. 2024. The Production Process Chain of Axial Flux Motors: A Comparative Study. In: 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS), 1–8. doi:10.1109/EPTS61482.2024.10586726, .
    18. Faber, Fides Lucia und Nejila Parspour. 2024. Interdisciplinary Evaluation of Implant Locations for Transcutaneous Inductive Energy Transfer Systems. In: 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), 729–733. doi:10.1109/WPTCE59894.2024.10557397, .

  4. 2023

    1. Petri, Timo, Marina Keller, Frieder Schuller und Nejila Parspour. 2023. Lifetime Analysis of the Insulation System of Traction Machines Based on the Partial Discharge Behavior of Hairpin Wire Pairs and Conventional Twisted Wire Pairs. In: 2023 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 1–8. doi:10.1109/CEIDP51414.2023.10410505, .
    2. Ye, Weizhou, Tobias Götz, Boya Qi und Nejila Parspour. 2023. A Communication-Based Synchronization and Control Method for Bidirectional Wireless Power Transfer System. In: IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, 1–6. doi:10.1109/IECON51785.2023.10311922, .
    3. Kaiser, Benedikt, Martin Schmid und Nejila Parspour. 2023. Comparison of Rotor Arrangements of Transverse Flux Machines for a Robotic Direct Drive optimized by Genetic Algorithm and Regression Tree Method. In: 2023 IEEE International Electric Machines & Drives Conference (IEMDC), 1–6. IEEE. doi:10.1109/IEMDC55163.2023.10238865, .
    4. Andreas Schütz, Benedikt Kaiser, Adrian Schäfer, Nejila Parspour, Armin Lechler und Alexander Verl. 2023. Verspannt zu mehr Präzision: Genauigkeitssteigerung durch adaptive Verspannung in Robotikantrieben. In: Robotik und Produktion, 26–27.
    5. Dettinger, Falk, Nasser Jazdi, Michael Weyrich, Lukas Brandl, Hans-Christian Reuss, Urs Pecha, Nejila Parspour, u. a. 2023. Machine-Learning-Based Fault Detection in Electric Vehicle Powertrains Using a Digital Twin. In: 23rd Stuttgart International Symposium. SAE International. doi:10.4271/2023-01-1214, .
    6. Schäfer, Adrian, Urs Pecha, Benedikt Kaiser, Martin Schmid und Nejila Parspour. 2023. Accelerated 3D FEA of an Axial Flux Machine by Exclusively Using the Magnetic Scalar Potential. Energies 16: 6596. doi:10.3390/en16186596, .
    7. Prantner, Michael und Nejila Parspour. 2023. Eddy Current Heating of Implanted Devices for Tumor Ablation: Numerical-Analytic Analysis and Optimization. IEEE Access: 1. doi:10.1109/ACCESS.2023.3280052, .
    8. Baehr, Andreas und Nejila Parspour. 2023. Novel analytical calculation method of a wireless power transfer system for an inductive electrically excited synchronous machine. In: 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. IEEE. doi:10.1109/WPTCE56855.2023.10216184, .
    9. Petri, Timo, Marina Keller und Nejila Parspour. 2023. The Influence of Voltage Form on the Insulation Resilience of Inverter-fed Low Voltage Traction Machines with Hairpin Windings. In: 2023 IEEE International Electric Machines & Drives Conference (IEMDC), 1–6. doi:10.1109/IEMDC55163.2023.10238888, .
    10. Baranowski, Michael, Nikolas Matkovic, Sebastian Kleim, Marco Friedmann, Jürgen Fleischer, Marlies Springmann, Peter Middendorf, Adrian Schäfer, Marcel Waldhof und Nejila Parspour. 2023. Additive-Subtractive Process Chain for Highly Functional Polymer Components. International Journal of Mechanical Engineering and Robotics Research: 339–346. doi:10.18178/ijmerr.12.6.339-346, .
    11. Kaiser, Benedikt, Adrian Schaefer, Andreas Schuetz, Nejila Parspour, Armin Lechler und Alexander Verl. 2023. Modelling of a Dual-Motor Robotic Drive with Estimation, Preload, and Guidance of Backlash. In: ISR Europe 2023; 56th International Symposium on Robotics, 125–130.
    12. Noeren, Jannis, Nejila Parspour und Lukas Elbracht. 2023. An Easily Scalable Dynamic Wireless Power Transfer System for Electric Vehicles. Energies 16. doi:10.3390/en16093936, https://www.mdpi.com/1996-1073/16/9/3936.
    13. Lu, Siyuan, Mike Böttigheimer und Nejila Parspour. 2023. An Impedance Mapping-Based T-Compensation Network and Control Strategy for WPT System with Full-Bridge Active Rectifier. IEEE Transactions on Power Electronics: 1–14. doi:10.1109/TPEL.2023.3294438, .
    14. Elbracht, Lukas, Jannis Noeren und Nejila Parspour. 2023. Design of a Scalable Multicoil Wireless Power Transfer System for Low Voltage Applications. In: 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE), 1–6. doi:10.1109/WPTCE56855.2023.10216130, .
    15. Götz, Tobias D. und Nejila Parspour. 2023. Decomposition of Impedance Loci in WPT Systems Under Mutual Interference of Magnetic Flux Conductivity Using Möbius Transform. In: IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, 1–8. doi:10.1109/IECON51785.2023.10311749, .
    16. Schmidt, Michael, Timo Wilfling, Armin Dietz und Nejila Parspour. 2023. An overview of design and calculation of a synchronous-reluctance machine. In: 2023 13th International Electric Drives Production Conference (EDPC), 1–8. doi:10.1109/EDPC60603.2023.10372169, .
    17. Gong, Yuancong, Andreas Gneiting, Chongshen Zhao und Nejila Parspour. 2023. Comparative Study of Different Surrogate Models in the Multi-physics Optimization of Synchronous Reluctance Machine. In: 2023 26th International Conference on Electrical Machines and Systems (ICEMS), 1284–1290. doi:10.1109/ICEMS59686.2023.10345114, .
    18. Müller, Samuel, David Maier und Nejila Parspour. 2023. Inductive Electrically Excited Synchronous Machine for Electrical Vehicles---Design, Optimization and Measurement. Energies 16. doi:10.3390/en16041657, https://www.mdpi.com/1996-1073/16/4/1657.
    19. Velić, Timijan, Yannik Becher und Nejila Parspour. 2023. A Pareto Based Comparison of DC/DC Converters for Variable DC-Link Voltage in Electric Vehicles. IEEE Open Journal of Power Electronics: 1–14. doi:10.1109/OJPEL.2023.3333255, .
    20. Gneiting, Andreas, Samuel Müller und Nejila Parspour. 2023. Sensorless Estimation of Rotor Current and Rotor Position for Inductive Electrically Excited Synchronous Machines. In: 2023 IEEE International Electric Machines & Drives Conference (IEMDC), 1–6. doi:10.1109/IEMDC55163.2023.10238998, .

  5. 2022

    1. Gneiting, Andreas, Marcel Waldhof und Nejila Parspour. 2022. A Systematic Design Methodology Based on Data Clustering for Automotive Drive Cycle Oriented Optimization of Electrically Excited Synchronous Machines. In: 2022 IEEE 7th Southern Power Electronics Conference (SPEC), 1–8. doi:10.1109/SPEC55080.2022.10058453, .
    2. Kresse, Thomas, Julian Schurr, Maximilian Lanz, Torsten Kunert, Martin Schmid, Nejila Parspour, Gerhard Schneider und Dagmar Goll. 2022. Additively Manufactured Transverse Flux Machine Components with Integrated Slits for Loss Reduction. Metals 12. doi:10.3390/met12111875, https://www.mdpi.com/2075-4701/12/11/1875.
    3. Kurz Sascha, Stillig Javier und Parspour Nejila. 2022. Concept of a Scalable Communication System for Industrial Wireless Power Transfer Modules. In: 2022 4th Global Power, Energy and Communication Conference (GPECOM), 124–129. doi:10.1109/GPECOM55404.2022.9815719, .
    4. Springmann, Marlies, Nikolas Matkovic, Adrian Schäfer, Marcel Waldhof, Tristan Schlotthauer, Marco Friedmann, Peter Middendorf, Jürgen Fleischer und Nejila Parspour. 2022. Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers. Key Engineering Materials 926: 268–279. doi:10.4028/p-ed900k, .
    5. Petri Timo, Keller Marina und Parspour Nejila. 2022. The Insulation Resilience of inverter-fed Low Voltage Traction Machines: Review, Challenges, Opportunities. IEEE Access: 1. doi:10.1109/ACCESS.2022.3210348, .
    6. Prantner, Michael, Nejila Parspour, Sebastian P. Haen, Michael Böckeler und Jürgen Hetzel. 2022. Analysis of Coil Configurations for a Contactless Thermal Tumor Ablation With Implanted Devices. IEEE Transactions on Biomedical Circuits and Systems 16: 79–93. doi:10.1109/TBCAS.2022.3142453, .
    7. Lüdecke, Fiona Dominique, Martin Schmid, Eva Rehe, Sangamithra Panneer Selvam, Nejila Parspour und Po Wen Cheng. 2022. Numerical Aspects of a Two-Way Coupling for Electro-Mechanical Interactions---A Wind Energy Perspective. Energies 15: 1178. doi:10.3390/en15031178, .
    8. Elbracht Lukas, Noeren Jannis und Parspour Nejila. 2022. Investigation of a 48V Dynamic Inductive Energy Transfer System for Low Voltage Electric Vehicles. In: 2022 Wireless Power Week (WPW), 492–496. doi:10.1109/WPW54272.2022.9853975, .
    9. Schmid Martin, Terfurth Jonathan, Kaiser Kim und Parspour Nejila. 2022. Electromagnetic Design of Electrical Machines - New Potentials of Additive Manufacturing with the Example of the Transverse Flux Machine. In: 2022 International Conference on Electrical Machines (ICEM), 1491–1497. doi:10.1109/ICEM51905.2022.9910628, .
    10. Pecha Urs, Wolter Kai, Wäschle Moritz, Parspour Nejila und Bause Katharina. 2022. Validation of Fault-Tolerant Control of Converters under Open-Switch Faults on Connected Test Benches. In: IECON 2022 -- 48th Annual Conference of the IEEE Industrial Electronics Society, 1–6. doi:10.1109/IECON49645.2022.9968422, .
    11. Goetz, Tobias, Andreas Baehr und Nejila Parspour. 2022. Contribution to the Coupling Behavior Analysis of WPT Systems for Electric Vehicles with Flush Ground and Buried Primary Side Mounting. In: 2022 IEEE 7th Southern Power Electronics Conference (SPEC), 1–6. doi:10.1109/SPEC55080.2022.10058243, .
    12. Brenner, Carolin Carmen, Alexander Enssle, Robert Schulz und Nejila Parspour. 2022. Navigation method utilizing floor-integrated inductive power supply modules for omnidirectional AGVs. Forschung im Ingenieurwesen. doi:10.1007/s10010-022-00605-y, .
    13. Gong Yuancong, Heim Markus, Waldhof Marcel, Wößner Wilken, Fischer Julian, Parspour Nejila und Fleischer Jürgen. 2022. Improvement of the Mechanical Strength of High Speed Synchronous Reluctance Machines by Fiber Reinforced Support Structures. In: 2022 International Conference on Electrical Machines 2022, 49–55. doi:10.1109/ICEM51905.2022.9910716, .
    14. Götz Tobias, Noeren Jannis, Elbracht Lukas und Parspour Nejila. 2022. Analysis of the Eigenvalue Distortion in a Double-Sided LCC-Compensated Stationary Automotive WPT System during Coil Alignment. In: 2022 Wireless Power Week (WPW), 503–508. doi:10.1109/WPW54272.2022.9853950, .
    15. Noeren Jannis, Elbracht Lukas, Parspour Nejila, Wörner Manuel und Spindler Markus. 2022. An Easily Scalable Dynamic WPT System for EVs. In: 2022 Wireless Power Week (WPW), 482–486. doi:10.1109/WPW54272.2022.9853998, .
    16. Ye Weizhou, Wang Shouzheng und Parspour Nejila. 2022. A Foreign Object Detection Method using High Frequency Excitation for Wireless Power Transfer. In: 2022 Wireless Power Week (WPW), 327–331. doi:10.1109/WPW54272.2022.9853979, .
    17. Velic Timijan, Barkow Maximilian und Parspour Nejila. 2022. Loss Model for SiC MOSFET based Power Modules using Synchronous Rectification. In: 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 503–510. doi:10.1109/SPEEDAM53979.2022.9842103, .
    18. Kaiser, Benedikt und Nejila Parspour. 2022. Transverse Flux Machine---A Review. IEEE Access 10: 18395–18419. doi:10.1109/ACCESS.2022.3150905, .
    19. Chen, Hao, Chenghui Fang, Guorui Guan und Nejila Parspour. 2022. Fault Diagnosis for Power Converter in SRM Drives Based on Current Prediction. IEEE Transactions on Industrial Electronics 69: 13576–13585. doi:10.1109/TIE.2021.3137607, .
    20. Keller Marina, Maier Marcel, Petri Timo und Parspour Nejila. 2022. Modelling the Dynamic Voltage Distribution in Electric Traction Motor Windings. In: 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 599–604. doi:10.1109/SPEEDAM53979.2022.9842170, .
    21. Schmid, Martin, Jonathan Terfurth, Kim Kaiser und Nejila Parspour. 2022. Electromagnetic Design of Electrical Machines - New Potentials of Additive Manufacturing with the Example of the Transverse Flux Machine. In: 2022 International Conference on Electrical Machines (ICEM), 1491–1497. Piscataway, NJ: IEEE. doi:10.1109/ICEM51905.2022.9910628, .
    22. Prantner, Michael und Nejila Parspour. 2022. Heating Power of Millimeter-Sized Implanted Coils for Tumor Ablation: Numerical-Analytic Analysis and Optimization. IEEE Access 10: 67493–67509. doi:10.1109/ACCESS.2022.3185751, .
    23. Kaiser, Benedikt, Jonathan Terfurth, Adrian Schäfer und Nejila Parspour. 2022. Reduction of the Backlash Effect for a Five-Phase Spatially Distributed Transverse Flux Machine. In: 2022 IEEE 7th Southern Power Electronics Conference (SPEC), 1–6. IEEE. doi:10.1109/SPEC55080.2022.10058314, .
    24. Waldhof, Marcel, Isabell Wochner, Katrin Stollenmaier, Nejila Parspour und Syn Schmitt. 2022. Design and Scaling of Exoskeleton Power Units Considering Load Cycles of Humans. Robotics 11: 107. doi:10.3390/robotics11050107, .
    25. Stillig Javier, Parspour Nejila, Ewert Daniel und Jung Thomas Josef. 2022. Feasibility Study on Machine Learning-based Method for Determining Self-and Mutual Inductance. In: 2022 International Seminar on Intelligent Technology and Its Applications (ISITIA), 193–198. doi:10.1109/ISITIA56226.2022.9855321, .
    26. Lu, Siyuan, Mike Böttigheimer und Nejila Parspour. 2022. An Optimized Design of T-Compensation Network for Wireless Power Transfer System with Full-Bridge Active Rectifier. In: 2022 Second International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART), 1–8. doi:10.1109/SMART55236.2022.9990441, .
    27. Baehr, Andreas, Tobias Goetz und Nejila Parspour. 2022. Ground Assembly Coil Design Routine for Dynamic Wireless Power Transfer. In: 2022 IEEE 7th Southern Power Electronics Conference (SPEC), 1–5. doi:10.1109/SPEC55080.2022.10058267, .

  6. 2021

    1. Lu, Siyuan, Timo Lammle und Nejila Parspour. 2021. Analysis and Design of a T-Compensation Network with Switch-Controlled Capacitor for Wireless Power Transfer System. In: 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), 1–6. IEEE. doi:10.1109/WoW51332.2021.9462860, .
    2. Stillig, Javier und Nejila Parspour. 2021. Novel Infrastructure Platform for a Flexible and Convertible Manufacturing. Advances in Science, Technology and Engineering Systems Journal 6: 356–368. doi:10.25046/aj060141, .
    3. Pecha Urs, Parspour Nejila und Gieck Fabian. 2021. Modeling and Analysis of Multiple Open-Switch Faults in Converters Supplying Permanent-Magnet Synchronous Machines. In: 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 1:240–246. doi:10.1109/SDEMPED51010.2021.9605533, .
    4. Prantner, Michael und Nejila Parspour. 2021. Analytic multi Taylor approximation (MTA) for the magnetic field of a filamentary circular current loop. Journal of Magnetism and Magnetic Materials 517: 167365. doi:10.1016/j.jmmm.2020.167365, .
    5. Maier, David, Weizhou Ye und Nejila Parspour. 2021. Contactless Energy Transfer - Analytical Calculation of the Coil Systems‘ Efficiencies for Different Topologies. In: 2021 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), 1–5. IEEE. doi:10.1109/WoW51332.2021.9462893, .

Einführung in die Elektrotechnik für TKYB, VING, LRT
Elektrische Maschinen I
Elektrische Maschinen II
Konstruktion elektrischer Maschinen
Induktives Laden

Zum Seitenanfang